
Sooner or later a charger will refuse your car. Most of the time the cause is simple and a calm routine gets the session going. This article lists the steps in order, from the checks that take a moment to the point where the car itself needs the carmaker's service department.
Check the simple things first
Before anything else, look at the plug and the car. The connector should be pushed all the way in and locked, the car should be in park, and the charge port should be clear of snow, leaves or grit. Many failed sessions turn out to be a plug that was not quite seated.
Then look at the car's charging settings on the touchscreen. A charge limit already reached, or a scheduled charging timer set for home, can stop a public session before it begins. Turn off the timer or raise the limit for the trip, and the session may start straight away.
- Plug pushed fully home and locked
- Car in park with the charge port clear
- No charging timer set to wait for a later hour
- Charge limit set above the current level
Restart the session in order
If the plug and settings look right, start over cleanly rather than tapping the screen repeatedly. End the session on the charger and in the app, unplug, and hang the connector back in its holder. Wait until the charger's screen shows that it is ready again before trying once more.
Then start the session in the order the charger asks for, which may mean tapping your card or choosing the stall in the app before you plug in. Some units want the plug first and the payment second. Following the screen's order is often all a stubborn charger needs.
- End the session on the charger and in the app
- Unplug and return the connector to its holder
- Wait for the screen to show the unit is ready
- Start again in the order the screen asks for
Try another stall, or another way to start
If the same stall refuses again, move to another one. At sites where stalls share a power cabinet, pick one that does not appear paired with the faulty unit. A different cable on the same unit can work too, since a damaged connector on one side does not necessarily affect the other.
If a card tap fails, try the app, and if the app fails, try the card or the car's own way of starting a session. A weak phone signal can break an app's connection to the charger, so stepping to a spot with better signal sometimes helps. Keep a second method set up before the trip for this reason.
Call the station's support line
The charger's label carries a support line for the station's operator. Give them the station's location and the stall's identifier from its label, and describe what the screen showed. They can often see the fault on their side, restart the unit remotely or start the session for you.
While you wait, check the next charger on your route and how much charge you have to reach it. If the support line cannot help, a short drive to another station is usually the quickest fix. Report the fault through the app as well, so other drivers see it.
When the problem is the car
If every charger refuses the car, or the car shows a warning light or a message about charging, stop trying stations and call the carmaker's service department or its roadside line. The owner's manual lists the number to call. Do not keep forcing sessions on a car that is reporting a fault.
Never use a charger with a cracked plug, a frayed cable or exposed wiring, and never use a car whose charge port is damaged or scorched. A burning smell or a plug too hot to hold is a reason to stop at once, unplug if you can do that without risk, and step away from the car and the charger.
What to take away
- Most refusals come from a loose plug or a charging timer
- Restart cleanly and follow the screen's order
- Try another stall and another way to start
- A car warning goes to the carmaker's service department
Before you set off
- Plug seated and locked, car in park
- Charging timer off and charge limit raised
- Session ended and restarted in the screen's order
- Another stall or cable tried
- A second way to start a session tried
- Support line called with the stall's identifier
Questions
The unit may have a fault, the app may have lost signal, or a charging timer or charge limit in the car may be blocking the session. Work through the simple checks, restart in order and try another stall. If every station refuses, contact the carmaker's service department.
End the session on the screen first, then unplug and wait for the charger to reset before trying again. If the car shows a fault message, contact the carmaker's service department rather than retrying repeatedly.
The station's location, the stall's identifier from its label and what the screen showed. Mention the way you tried to start the session, since that helps them find where it failed.



